Clipper 350, 400, 500 and 600

  • Designed For Grassy Areas-Light Duty
  • Available In 3 1/2, 4, 5 and 6 Foot Cutting Widths
  • Equipped With A 40 Horsepower Gearbox
  • Formed Deck Made Of 12 Gauge Plate
  • Recommended For Tractors Not Exceeding 30 Horsepower
  • Floating 3 Point Hitch
  • Slip Clutch Is Not Available
  • Stump Jumper Included
  • Steel Bushing Wheels

Andy 400, 500 and 600

  • Designed For Small Areas Needing A Heavier Touch-Standard Duty
  • 40 Horsepower Gearbox
  • Sides Made Of 6 Inch Channel Running The Length Of The Cutter
  • Deck Made Of 12 Gauge Plate
  • Floating 3 Point Hitch
  • Recommended For Tractors Not Exceeding 30 Horsepower
  • Available In 4, 5 and 6 Foot Cutting Widths
  • Slip Clutch Is Not Available
  • Stump Jumper Included
  • Steel Bushing Wheels

LMC Standard Cutter

  • Available in 4, 5 and 6 Foot Cutting Widths
  • Formed Deck Made Of 10 Gauge Plate
  • Braces Throughout For Extra Support
  • 4 Foot Comes With 40 Horsepower Gearbox Shear Bolt Or Slip Clutch
  • 5 and 6 Foot Can Have Either A 40 Or 60 Horsepower Gearbox Shear Bolt Or Slip Clutch
  • Stump Jumper Included
  • Bearing Wheels
  • Available Upon Request If You Order 10 Or More

Wind Special

  • Available In 5, 6 and 7 Foot Cutting Widths
  • Deck Is Made Of 7 Inch Gauge Plate And Sides Of 6 Inch Structural Channel
  • Shear Bolt Or Slip Clutch
  • Available With Flex Hitch
  • 5 And 6 Foot Are Available In 40 Horsepower Or 60 Horsepower Gearbox And 1 Or 2 Tail Wheels
  • 7 Foot Has Dual Wheels And Is Only Available With A 60 Horsepower Gearbox
  • Stump Jumper Included
  • Bearing Wheels

Southern Pride

  • Designed For Medium Duty General Grass Mowing And Small Saplings Only 1 To 1 1/2 Inches
  • Available In 8 And 10 Foot Cutting Widths
  • 40 Horsepower Minimum And 70 Horsepower Maximum
  • Category 1 Hitch
  • Dual Wheel
  • Size 5 Clutch PTO
  • 2 60 Horsepower Outside Gearboxes And 1 80 Horsepower T-Box

LMC Heavy Duty Cutter

  • Designed For Heavy Duty Cutting
  • Heavy Duty Round Blade Carrier Included
  • Manufactured With 3/16 Inch Plate
  • Comes Standard With A Slip Clutch And Standard Cat II
  • Channel Sides For Reinforcement
  • Available In 5, 6, 7 and 8 Foot Cutting Widths
  • 5 Foot Has 60 To 75 Horsepower And 1 Wheel, Square Deck Only
  • 6 And 7 Foot Available With 60, 75 Or 120 Horsepower Gearbox
  • 8 Foot Has 120 Horsepower Gearbox Only
  • 6, 7 And 8 Foot Available In Square Or Tapered Deck
  • New Style 3 Point Hitch
  • Old Style 3 Point Hitch Parts Are Available For The Hitch Only
  • Optional Chains

Flex Wing

  • 12 Or 15 (Heavy Duty) Foot Cutting Width
  • Heavy Duty 75 Horsepower Minimum And Standard Minimum 60 Horsepower
  • 3 Inch Diameter Cutting Capacity On Heavy Duty And 1 1/2 Inch Capacity On Standard
  • 2 To 14 Inch Cutting Height
  • 6 Inch Blade Overlap
  • 250 Horsepower Divider Box
  • 120 Horsepower Wing And Center Boxes On
  • #8 ASAE CV Main Driveline And #6 ASAE Wing And Center Shaft
  • 4 Disc Clutch On Center And Wing Boxes
  • Laminated Wheels And Heavy Duty Hubs
  • Spring Loaded Walking Beam
  • Dual Wheel Center
  • Double Chain Guards Front And Rear
  • Available With 2 Or 3 Remotes
  • 3/16 Plate Deck With Safety Chains On Heavy Duty And 10 Gauge Deck On Standard
  • Square Tube Frame
  • 4800 Pounds
  • Deck Rings Optional
  • PTO Drive Lines
  • Blade Carriers Available For Heavy Duty Model
  • Bearing Wheels

Skid Steer Cutter

  • Available In 5, 6 And 7 Foot Cutting Widths
  • 3/16 x 72 Inch Square Deck For 6 Foot
  • 3/16 x 84 Inch Square Deck For 7 Foot
  • 60 Horsepower / Spline Gearbox
  • 4 Inch Wide Double Cutting Edge Blades 1/2 x 4 x 24 3/4
  • 20 GPM Low Flow

Hours:

Sunday: Closed Closed
Monday: 7:00am 4:30pm
Tuesday: 7:00am 4:30pm
Wednesday: 7:00am 4:30pm
Thursday: 7:00am 4:30pm
Friday: 7:00am 4:30pm
Saturday: 8:00am Noon